User`s manual

138
Farbe: P 249 – Prüfmittelnummer: 126 X
Symbols, display messages and troubleshooting
139
Symbols, display messages and troubleshooting
10
10.2 Display messages and troubleshooting
When elements in the display are surrounded by a halo, it indicates that
they are flashing in the meter’s display.
If you receive frequent error messages, please contact your local cus
-
tomer support and service centre (see Chapter 16 “Local customer sup
-
port and service”).
If this happens … it means:
The meter will not turn on.  The batteries (normal or recharge-
able) are empty.
Insert batteries (new or recharged).
 You inserted the batteries the wrong
way round. Remove the batteries
and place them in the battery com
-
partment as instructed.
If the batteries were left the wrong
way round in the meter for more
than two minutes, the meter forgets
the year, date and time. Re-enter
them (see Chapters 3 “Settings”).

If this happens … it means:

 The surrounding temperature is be-
low 0 °C.
Change location. The temperature
must be between +10 °C and
+40 °C. Allow the meter to warm up
slowly.
 Condensation has affected the elec-
tronics.
Let the meter dry slowly.
 The meter is defective.
Please contact your local customer
support and service centre (see
Chapter 16 “Local customer support
and service”).
The meter is turned on, but
the display is blank.
The display is defective.
Please contact your local customer sup-
port and service centre (see Chapter 16
“Local customer support and service”).