Technical information

BEEPER BRIGHTNESS TIME / DATE TEST REMINDERS
HYPO
Chapter 1: Understanding Your New System
14 ACCU-CHEK Customer Care Service Center 1-800-858-8072
You are here
1. With the meter off, press
S
S
to enter the set
mode. The meter turns on and briefly shows
all of the display symbols. Next, the beeper
symbol is displayed with your current selection
flashing.
2. Press
S
S
twice to reach the year with the last
two numbers of the year flashing. Press
M
M
to
change the year. Press
S
S
to set your selection.
Setting the Year, Time, and Date
Your new meter comes with the batteries already installed and a preset time and date. You may need
to change the time to your time zone. Setting the time and date is important if you use the meter’s
memory or download your stored results to a computer.