User`s manual
5. Press and release the ON/OFF button.The hour
display flashes.
6. Press and release the right or left arrow button until
the correct hour is displayed.
7. Press and release the ON/OFF button.The minute
display flashes.
8. Press and release the right or left arrow button until
the correct minute is displayed.
9. Press and release the ON/OFF button.The month
display flashes.
10. Press and release the right or left arrow button until
the correct month is displayed.
11. Press and release the ON/OFF button.The day
display flashes.
12. Press and release the right or left arrow button until
the correct day is displayed.
13. Press and release the ON/OFF button.The year
display flashes.
14. Press and release the right or left arrow button until
the correct year is displayed.
15. To leave this function, press and hold down the
ON/OFF button until the flashing strip symbol or
code and “---” are displayed.
Note: You may leave the set mode at any time by
pressing and holding the ON/OFF button. The
settings you have entered will be saved.
5. Press and hold down the
ON/OFF button until strip
icon is seen flashing or
code and “---” appear to
leave this function.
Setting the Time, Date and Year
Do I have to set the time and date?
Time and date should be set prior to testing if you plan
to download the results into software or if you plan to
review your memory to check when a test was done.
To set the time, date and year:
1. Press and release the
ON/OFF button to turn the
meter ON.
2. Wait until the strip icon
flashes or code and “---”
appear before proceeding
to step 3.
3. Press and hold down the
ON/OFF button until “set”
appears at the bottom of
the screen. Release the
ON/OFF button.
4. Press and release the ON/OFF button to confirm
beeper setting and move to set the time.
7
6
I
I
I
I
I
I
I
I
306-17453 Adv3 Inside Man 7/25/03 10:19 AM Page 6