User`s manual

Meter has detected the
loss of all results in
memory.Turn meter
OFF and turn it back
ON again.You may not
be able to recall the
results previously stored in memory, although
your meter will store any future test results.
Temperature is above or below
the operating range of the
meter.Move to an area
between 14° and 40°C, wait
5 minutes, and perform a
test. Do not artificially heat
or cool the meter.
Meter has failed its series of
electronic checks.Turn meter
OFF,then ON again. If this error
display still appears, testing
cannot take place. Call our
Diabetes Care Info-Line.
Your blood glucose result may
be extremely high and above
the system’s reading range. If
this confirms the way you feel,
contact your doctor
immediately.
If this does not confirm the way you feel, run a quality
control check with your glucose control solutions and a
new test strip. If the control result is within the
acceptable range, review the proper testing procedure
and repeat your blood glucose test with a new test strip.
If mmol/L error still appears for your blood glucose test,
your blood glucose result may be extremely high and
above the system’s reading range. Contact your doctor
immediately.
If the control result is not within the acceptable range,
refer to Understanding Control Results (see page 27).
41
40
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
306-17453 Adv3 Inside Man 7/25/03 10:19 AM Page 40