Technical information

Chapter 2: Control Testing
Why Run Control Tests
Control tests ensure that both the meter and the test strips are working properly and giving reliable results.
You should run a control test when:
• The meter is new
• You open a new box of test strips
• You leave the cap off of the test strip vial
• You want to check the performance of the meter
and test strips
• You drop the meter
• Your test results don’t agree with the way you feel
• You want to make sure you’re performing tests
correctly
About the Control Solution
• Make sure you use the control solution that
matches your test strips (for example, Accu-Chek
Comfort Curve Control Solution (blue liquid) with
Accu-Chek Comfort Curve Test Strips).
• When you first open the bottle, write the date on
the label – the control solution is good for three
months from that date or until the expiration date
on the bottle, whichever comes first.
• Never use control solution that has expired.
• Control solution can stain clothes. If you spill it,
wash your clothes with soap and water.
• Always close the control solution bottle tightly.
• Store at room temperature less than 90°F (32°C).
Do not freeze.
16
362-21173 Manual, AC3 Domestic 2/17/04 11:26 AM Page 16