Product Manual

Extended Functionalities
122
Patient list validation
Depending on DMS settings, you have the following options for patient list validation when work-
ing with Patient lists:
■ A Patient ID does not have to be on the list to be used (only valid for validation mode
“off”).
■ The meter displays a warning if the Patient ID entered is not on the list.
■ The meter displays an error message if the ID was not found on the list of valid Patient IDs.
To proceed with the test, you must scan ( if ID set to “hidden”) or select ( if ID set to Required) a
valid Patient ID.
Barcode scanner
Using a DMS, the barcode scanner may be configured to accept only selected barcode symbol-
ogies (e.g., EAN-13 Barcodes are not allowed). Furthermore it is possible to define a barcode
mask for Patient ID and Operator ID. With masks being defined, the meter checks a barcode after
scanning and rejects it, if it does not match the mask.