Product Manual

18 Operator’s Manual V03
6.7 Data Transmission to a PC or Host Computer
In unidirectional mode, the results are transmitted immediately with the sequence number, Patient ID (if entered), date
and time. In bidirectional mode, transmission can only be accomplished by using the “Send” function when “MEMORY” is
displayed. If a bidirectional PC/host communication link cannot be established, the Urisys
1100
®
Urine Analyzer aborts
transmission after several attempts and reports an “INTERFACE ERROR !” (see Section 8).
In ASTM mode the results, sequence number, Operator ID, Device ID, Patient ID (if entered), date and time of the
measurement, and of the last calibration will be sent to the host.
For further information on connecting to a serial interface, refer to Section 9.1.
ATTENTION: Ensure that all required data is backed up on a regular basis.