User Manual

99
Reminders and Meter Settings
CoaguChek INRange User’s Manual
Data Transfer
The CoaguChek INRange meter is able to
communicate with a computer and/or other
devices either via USB or a wireless Bluetooth
connection. Using the Data Transfer option
(see chapter Data transfer starting on page
64) enables the transfer mode (USB or
Bluetooth) preselected here.
To set up data transfer:
1 Select Data Transfer and press the Enter
button
to open the corresponding
menu.
The currently set transfer mode is shown with
a green dot on the right side.
2 Use the Arrow up/down buttons
to
select the desired transfer mode.
3 Press the Enter button
to conrm the
selection, which is now marked by the
green dot.
4 Press the Enter button
again to save the
selected transfer mode.
Settings
Beeper Volume
Set Targets
Result Format
Display Brightness
Data Transfer
Button Click
Data Transfer
Bluetooth
None
USB
Save
DRAFT - CONFIDENTIAL