User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
97
Reminders and Meter Settings
CoaguChek INRange User’s Manual
Display Brightness
1 Select Display Brightness and press the
Enter button
to open the corresponding
menu.
The currently set display brightness is shown
with a green dot on the right side.
2 Use the Arrow up/down buttons
to
select the desired display brightness. The
display will temporarily switch to the cur-
rently highlighted brightness.
3 Press the Enter button
to conrm the
selection, which is now marked by the
green dot.
4 Press the Enter button
again to save the
selected display brightness.
To improve battery lifetime, choose a lower
display brightness setting.
Settings
Beeper Volume
Set Targets
Result Format
Display Brightness
Units
Button Click
Display Brightness
Text
Medium
High
Low
Save
DRAFT - CONFIDENTIAL