User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
75
Reviewing and Handling Data
CoaguChek INRange User’s Manual
List of results
All test results are listed in chronological
order, with the latest result on top. The list
contains the following columns:
• Date and Time
• PT Coagulation (INR)
The result value is shown in INR. If the re-
sult is outside the measuring range, either
LOW or HIGH will be shown.
• Target range (INR)
The target range valid at that point in time.
If the result is outside the target range
the cell is colored blue (above) or yellow
(below).
• Comments
• Data transfer
This indicator shows if a result has previ-
ously been transferred using the “Data
transfer” function of the meter. Viewing a
report on the computer as described here
is not a data transfer and thus does not
activate this indicator.
DRAFT - CONFIDENTIAL