User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
66
Reviewing and Handling Data
CoaguChek INRange User’s Manual
For connecting the meter to a computer, you
will need a suitable USB cable (included in
the kit). Connect the micro USB type B plug
to the meter (the USB port is located on the
right-hand side of the meter) and the USB
type A plug to the computer. In order to
transfer data, always connect the cable to the
meter rst and then to the computer.
Data transfer must be actively triggered
by the computer application or device app
used for reading the stored data.
When the connection has been established
and the download command was received,
the meter informs you about the progress.
To save battery power remove the USB
cable after transferring the test results to
the PC.
Data Transfer
Text
Transferring data...
Transferring Data...
Data Transfer
Data Transfer
Complete
DRAFT - CONFIDENTIAL