User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
44
Testing a Capillary Blood Sample
CoaguChek INRange User’s Manual
The test strip symbol prompts you to insert a
test strip.
7 Remove a test strip from its container. Im-
mediately after removing a test strip, close
the container again with the stopper.
NOTICE
Exposure to external inuences (e.g. humidity)
may deteriorate the test strips and may lead
to error messages.
8 Hold the test strip so the lettering, the
arrows and the blood drop symbols are
facing upward.
9 Slide the test strip into the test strip guide
in the direction indicated by the arrows.
Slide the test strip in as far as it will go.
A beep tone indicates that the meter has
detected the test strip. (Unless you have
disabled the beeper in the Settings menu.)
DRAFT - CONFIDENTIAL