User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
42
Testing a Capillary Blood Sample
CoaguChek INRange User’s Manual
Performing a test
1 Wash your hands with soap and warm
water. Dry them thoroughly.
WARNING
Residues of water on the skin can dilute the
drop of blood and so produce false results.
2 Place the meter on a level, vibration-free
surface or hold it in your hand so it is
roughly horizontal.
3 Power the meter on by pressing the Enter
button
. Alternatively, you can insert a
test strip to power it on, which will put the
meter – after completing the startup – into
test mode directly.
DRAFT - CONFIDENTIAL