User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
38
Testing a Capillary Blood Sample
CoaguChek INRange User’s Manual
Important notes
Always …
• close the container immediately after
having removed a test strip.
• operate the meter at an ambient tempera-
ture between 15 °C and 32 °C.
• place the meter on a level, stable surface
(table) or hold it so it is roughly horizontal.
• follow the information on correct handling
of test strips in the package insert.
• keep the test strip guide and housing
clean. Refer to the chapter Cleaning and
Disinfecting the Meter and the Lancing
Device.
DRAFT - CONFIDENTIAL