User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
31
Starting Up
CoaguChek INRange User’s Manual
The meter now displays the screen for setting
the time format.
5 Use the Arrow up/down buttons
to select the time format for the display
(24 hour or 12 hour am/pm). The newly
selected format is highlighted (blue).
6 Press the Enter button
to conrm the
selection, which is now marked by the
green dot.
7 Press the Enter button
again to save
the setting. The screen for setting time and
date follows next.
All test results are saved together with time
and date. Analyzing stored test results or
using reminders will only work with time
and date correctly set. Always check (and,
if necessary adjust) time and date after
replacing the batteries.
Throughout this manual the 24h format is
used on example screens.
Time & Date
24 hr Format
12 hr Format
Next
Time & Date
13
17Sep
Next
45:
2015
Time & Date
PM
01
17Sep
Next
45:
2015
DRAFT - CONFIDENTIAL