User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
28
Starting Up
CoaguChek INRange User’s Manual
1 Turn the meter over.
2 Gently press the tab on the battery
compartment cover towards the top of the
meter and lift off the cover.
3 Insert the four batteries in the battery
compartment as indicated. Pay attention
to the positions of “+” (top of battery) and
“–” (at end).
4 Re-attach the cover. Close the battery
compartment by pushing the cover down
until the tab snaps into place.
DRAFT - CONFIDENTIAL