User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
116
Other Functions and Troubleshooting
CoaguChek INRange User’s Manual
Display Test
The Display Test lets you check the meter’s
screen for proper functioning. In case you
suspect the screen (or parts of it) to be defec-
tive, perform this display test.
1 Select Display Test and press the Enter
button
to proceed.
2 Read the information screen and press the
Enter button
to proceed.
3 Step through the following screens
by pressing the Enter button
, while
inspecting each one for defective pixels or
other defects.
If all screens appeared awlessly, your display
is functioning properly.
Other
Text
About
Clear Memory
Meter Log
Display Test
Firmware Update
Display Test
OK
Display test. Go through
the four colored screens
with OK.
DRAFT - CONFIDENTIAL