User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
105
Cleaning and Disinfecting the Meter and the Lancing Device
CoaguChek INRange User’s Manual
1 With the meter turned off, wipe the meter’s
exterior clean.
2 With a fresh dry cloth or lint-free tissue,
wipe away residual moisture and uids
after cleaning the housing.
3 Allow wiped areas to dry for at least 10
minutes before performing a test.
Cleaning the test strip guide
1 Remove the test strip guide cover to clean
it. (Use your thumbnail to open the cover
of the test strip guide by pressing its front
edge upward.) Move the cover safely away
from the meter.
2 Rinse the cover with warm water or wipe
it clean using the solutions recommended
above. Let the test strip guide cover dry for
at least 10 minutes before re-attaching it.
DRAFT - CONFIDENTIAL