Users Manual Part 2

473General configuration
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
Instrument site, location, and name
In this section
Site(473)
Location(473)
Device name(474)
Site
This configuration item assigns the name of the site at
which the instrument is used. It is assigned by DMS or
barcode.
The site name is visible at the bottom of the Glucose
screen and the charging screen, above the instrument
location if set.
It can contain wide characters.
u About the charging screen (45)
Item ID
SITE
Available options/values
• ST: 0-20
• No default value set.
Configuration
You configure the Site configuration item using the
following:
• Data management system (e.g., cobas
®
infinity POC)
• Barcode (generated via cobas
®
infinity edge)
u Related topics
• Location (473)
Location
This configuration item assigns the name of the location
at which the instrument is used. It is assigned by DMS or
barcode.
The location name is visible at the bottom of the
Glucose screen and the charging screen, below the
instrument site if set.
It can contain wide characters.
11 General configuration