Users Manual Part 2

464 Measurement workflow
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
Condition for required comments on patient results
This configuration item specifies when comments must
be added to a patient result, based on the result range
into which a patient test result falls.
Item ID
COMMENTS_REQUIRED_LEVEL_PATIENT_TESTING
Available values/format
• Below/above normal range (default)
[REQUIRED_IF_OUT_OF_NORMAL_RANGE]
A comment is required when the patient result is
above or below the normal range.
• Below/above critical range
[REQUIRED_IF_OUT_OF_CRITICAL_RANGE]
A comment is required when the patient result is
below critical range lower limit, or above critical
range upper limit.
• Below/above reportable range
[REQUIRED_IF_OUT_OF_REPORTABLE_RANGE]
A comment is required when the patient result is
below reportable range lower limit or above
reportable range upper limit.
• Below/above measuring range
[REQUIRED_IF_OUT_OF_SYSTEM_MEASUREMENT_
RANGE]
A comment is required when the patient result is
outside the measuring range.
Dependencies
The Condition for required comments on patient
results configuration item is only relevant when the
Allow comments on patient results configuration item
has a value of Required when below or above
selected range.
Configuration
You configure the Condition for required comments
on patient results configuration item using the
following:
• Data management system (e.g., cobas
®
infinity POC)
• Barcode (generated via cobas
®
infinity edge)
u Related topics
• Allow comments on patient results (464)
Allow comments on patient results
This configuration item determines comment handling
for patient tests.
11 General configuration