Users Manual Part 2

458 Measurement workflow
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
Measurement workflow
In this section
Emergency workflow(458)
Test strip ejection(459)
Sample type(460)
Result unit (glucose tests)(460)
Configure override QC(461)
Comment management(462)
Emergency workflow
In this section
Allow emergency tests(458)
Default patient ID for emergency tests(459)
Allow emergency tests
This configuration item enables or disables the
emergency workflow. When enabled, the Emergency
button is accessible on the Tests screen.
The emergency workflow allows a glucose test to be
performed without patient identification.
Item ID
EMERGENCY_WORKFLOW
Available values/format
• Disabled (default)
[false]
Emergency workflow is disabled.
• Enabled
[true]
Emergency workflow is enabled.
Dependencies
The Allow emergency tests configuration item works
in conjunction with the Default patient ID for
emergency tests configuration item which provides the
patient ID used in an emergency workflow.
Configuration
You configure the Allow emergency tests
configuration item using the following:
• Data management system (e.g., cobas
®
infinity POC)
11 General configuration