Users Manual Part 2

418 Connectivity
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
Dependencies
If the DMS TLS level configuration item is set to TLS
enabled or to TLS enabled (FIPS approved mode),
there must be a valid certificate stored in the DMS TLS
certificate configuration item.
Configuration
You configure the DMS TLS certificate configuration
item using the following:
• Data management system (e.g., cobas
®
infinity POC)
DMS TLS certificate password
This configuration item specifies the password which is
necessary if the DMS TLS certificate is stored as PFX.
Item ID
DMS_TLS_CERTIFICATE_PASSWORD
Available values/format
• The initial certificate is stored during production
(default).
• 0-64
Dependencies
This configuration item is required when the
DMS_TLS_CERTIFICATE_FORMAT is PKCS#12.
Configuration
You configure the DMS TLS certificate password
configuration item using the following:
• Data management system (e.g., cobas
®
infinity POC)
cobas infinity edge TLS level
This configuration item determines the TLS security level
which is used for the connection to the
cobas
®
infinity edge.
Changing the cobas infinity edge TLS level must only be
done after contacting your Roche representative.
The instrument only accepts TLSv1.2 and the following
cipher suites are supported:
• TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
• TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
• TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_S
HA256
• TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
• TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
10 Initial configuration