Users Manual Part 2

405Initial configuration
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
If the DHCP is disabled, the instrument either needs to
have a valid static IP configuration either as IP4 (DNS
IPv4 address, Gateway IPv4 address, Instrument
IPv4 address, IPv4 subnet mask),
or as IP6 (DNS IPv6 address, Gateway IPv6 address,
Instrument IPv6 address).
Configuration
You configure the Use DHCP configuration item using
the following:
• Data management system (e.g., cobas
®
infinity POC)
• Barcode (generated via cobas
®
infinity edge)
Use domain name system (DNS)?
This configuration item specifies the use of the DNS
(Domain Name System).
Item ID
USE_DNS_BOOL_WLAN_1
Available values/format
• Yes (default)
[true]
DNS is enabled.
• No
[false]
DNS is disabled.
Dependencies
If DNS use is enabled, configuration items defining host
machines/servers (Data management system IP
address / host name, cobas infinity edge IP
address / host name, NTP server address) can be set
as fully qualified domain names (FQDN).
If DNS use is disabled, configuration items defining host
machines/servers (Data management system IP
address / host name, cobas infinity edge IP
address / host name, NTP server address) must be
set as IP addresses.
Configuration
You configure the Use domain name system (DNS)?
configuration item using the following:
• Data management system (e.g., cobas
®
infinity POC)
• Barcode (generated via cobas
®
infinity edge)
10 Initial configuration