Users Manual Part 2

ManualsBrandsRoche Diagnostics ManualsHealth MonitorsBlood Glucose meter

201

202

203

204

205

206

207

208

209

210

399Initial configuration

Roche Diagnostics

cobas

pulse · Software version 01.03 · User Assistance · Publication version 1.0

Dependencies

Depending on the DHCP server capabilities, the

instrument automatically receives an NTP server address.

If the DHCP server does not provide an NTP server

address, the NTP server address configuration item

must be set to a valid value.

Configuration

You configure the NTP server address configuration

item using the following:

• Data management system (e.g., cobas

infinity POC)

• Barcode (generated via cobas

infinity edge)

Instrument time zone

This configuration item determines the time zone of the

instrument taken from a subset of the ICANN/IANA time

zone database (also referred to as Olson database).

This time zone is used as the instrument time zone and

will be taken into account when the instrument receives

the actual time via NTP or via POCT1-A directive.

If the Instrument time zone configuration item is not

set to a dedicated time zone (e.g., Europe/Berlin), then

the daylight saving logic is not active.

Item ID

TIME_ZONE

Available values/format

• 0-50 characters

• Etc./GMT (default)

• For a list of valid time zones refer to the appropriate

subset of the ICANN/IANA time zone database.

Dependencies

The Network Time Protocol (NTP) configuration item

is set to Enabled.