Users Manual Part 2

393Initial configuration
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
DNS IPv4 address
This configuration item specifies the DNS IPv4 address.
Item ID
DNS_IP4_ADDRESS
Available values/format
0.0.0.0 – 255.255.255.255
Dependencies
• If the Use DHCP configuration item has a value of
Yes, the instrument will normally receive this value
automatically (depending on the DHCP server
configuration) and this configuration item can remain
empty.
• If the Use DHCP configuration item has a value of
No, and the instrument uses host names, this
configuration item must be set.
Configuration
You configure the DNS IPv4 address configuration item
using the following:
• Data management system (e.g., cobas
®
infinity POC)
• Barcode (generated via cobas
®
infinity edge)
DNS IPv6 address
This configuration item specifies the DNS IPv6 address.
Item ID
DNS_IP6_ADDRESS
Available values/format
Only the “preferred form"
(4)
is supported. Compressing
zeros, mixed IPv6/IPv4 representations or scoped
addresses are not supported.
Examples:
fd00:0:0:0:4533:4431:55b5:b46 is supported.
fd00:0000:0000:0000:4533:4431:55b5:b46 is supported.
fd00::4533:4431:55b5:b46 is not supported due to
compressed zeros.
fd00:0000:0000:0000:4533:4431:85.181.11.70 is not
supported due to mixed IPv6/IPv4 notation.
(4)
RFC 2373 (paragraph 2.2 1.)
10 Initial configuration