Users Manual Part 2

388 Barcode camera configuration
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
Barcode camera configuration
In this section
Minimum barcode scanning time(388)
Checksum validation of barcode type "Interleaved 2 of
5"(388)
Minimum barcode scanning time
This configuration item specifies the minimum amount of
time in milliseconds (ms), that the barcode camera
preview window must focus on a barcode to ensure that
it is read.
Item ID
BCS_BARCODE_FOCUS_TIMESPAN
Available values/format
• 0 ms (default)
(deactivates the focus scanning time)
• 700 - 9999 ms
(1 - 699 ms are invalid)
Format:
[0]|[789][0-9]{2}|[123456789][0-9]{3}
Dependencies
• The Patient entry type configuration item has a
value of Barcode.
• User authentication required has a value of
Barcode.
Configuration
You configure the Minimum barcode scanning time
configuration item using the following:
• Data management system (e.g., cobas
®
infinity POC)
• Barcode (generated via cobas
®
infinity edge)
Checksum validation of barcode type "Interleaved 2 of 5"
This configuration item validates scanned patient ID and
user ID barcodes when they are of the "Interleaved 2 of
5" barcode type.
Item ID
BCS_CODE_I2OF5_CHECKSUM
10 Initial configuration