Users Manual Part 2

382 QC configuration
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
Show numeric QC result value
This configuration item specifies how a QC test result is
displayed.
Item ID
QC_RESULT_DISPLAY
Available values/format
• Enabled (default)
[true]
The result is displayed as a "Pass" or "Fail" together
with a numeric value.
• Disabled
[false]
The result is displayed as a "Pass" or a "Fail" only.
Configuration
You configure the Show numeric QC result value
configuration item using the following:
• Data management system (e.g., cobas
®
infinity POC)
• Barcode (generated via cobas
®
infinity edge)
QC range handling
In this section
Allowed deviation for QC level 1 result(382)
Allowed deviation for QC level 2 result(383)
Allowed deviation for QC level 1 result
This configuration item specifies the permissible
deviation from the level 1 QC material target value for
which a QC result is valid.
The custom deviation configuration depends upon the
QC version. The QC version defines the target values
(level 1 and level 2) of a QC kit provided by Roche. The
QC version ranges from 0 to 9.
The QC version of a QC kit is located in Settings > Lot
management > Lot management > QC lots. The
initial QC version at product launch is 0.
Item ID
GLU_QC_CUSTOM_DEVIATION_L1
Available values/format
SET of value pairs (comma separated)
10 Initial configuration