Users Manual Part 2

372 Formats and language configuration
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
Time format
This configuration item specifies the time format that is
used on the instrument.
When an instrument is started for the first time and a
manual installation is performed, you are prompted to
select the time format using the user interface.
Thereafter you cannot change of the time format using
the user interface.
i
The format of the time on the status bar is
determined by the Language and region
configuration, not the Time format configuration.
Item ID
TIME_FORMAT
Available values/format
• 12 hours (default)
[HOURS_12]
• 24 hours
[HOURS_24]
Configuration
You configure the Time format configuration item using
the following:
• Data management system (e.g., cobas
®
infinity POC)
• Barcode (generated via cobas
®
infinity edge)
• User interface (only during initial configuration)
u Related topics
• About instrument configuration (365)
Language and region
This configuration item determines the language and
region combination used on the instrument.
It consists of a language tag and a region tag:
<language tag>-<region tag>
The language tag must be set according to the permitted
values
(2)
listed in the table (e.g., en for English). The
region tag must be set according to the list of permitted
values.
The Chinese language and region are handled as follows:
(2)
ISO 639-1
10 Initial configuration