Users Manual Part 2

365Initial configuration
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
About instrument configuration
You can perform a basic initial installation on the
instrument manually, or by using a barcode.
Glucose
Language
Manual
installation
Installation by
barcode
i
For more detailed information, refer to the cobas
pulse Connectivity guide.
Depending on the systems to which the instrument is
connected (DMS, cobas
®
infinity edge), further
configuration will be made by the corresponding
systems.
When you turn on the instrument for the first time you
are prompted to select the language you require for the
user interface.
After selecting the language, you choose the appropriate
installation option.
Installation by barcode
An installation by barcode configures an instrument to
be able to connect with the intended system with which
the instrument will connect (DMS,
cobas
®
infinity edge ). If the instrument is connected to
a DMS, it receives all additional configuration
information from the DMS.
Installation by barcode
Wi-Fi activated
Associated
Authenticated
Received IP:
Gateway:
DNS:
Contacted DMS
Connected to DMS
Contacted cobas infinity edge
Connected to cobas infinity edge
This method is best suited when a large number of
instruments must be configured.
The configuration information must first be set using the
configuration tool (cobas
®
infinity edge).
Tapping the Installation by barcode button displays
the Scan barcode screen with which you scan the
barcode containing the configuration information which
enables the instrument to connect to the intended
systems (DMS, cobas
®
infinity edge).
After scanning the barcode successfully, the instrument
connects to the intended systems for further instrument
configuration.
Manual installation
On the Manual installation screen you are prompted to
do the following:
10 Initial configuration