Quick Guide User Manual

ManualsBrandsRobustel ManualsRoutersM1000

Robustel GoRugged M1000 Quick Guide

RT_QG_M1000 _v.1.0.0 24.01.2014 1 / 6

Robustel GoRugged M1000 Quick Guide

Chapter 1. Interface Introduction

1.1 Overview

1.2 LED Indicators

After inserting the SIM card into the modem and power on, the LED indicators’ status should be as follow when work

normally:

Name

Color

Status

RSSI (3 LEDs)

Green

At least two bars

NET

Red

Registered to network: 75 ms on / 3 s off

SYS

Green

Normal mode: blinking 1 time/2 seconds

Config mode: blinking 2 times/second

PWR

Green

On when DC power connection

Note

：

Please refer to Robustel GoRugged M1000 User Guide to get more details about the LED indicators.

Summary of content (6 pages)

PAGE 1
Robustel GoRugged M1000 Quick Guide Robustel GoRugged M1000 Quick Guide Chapter 1. Interface Introduction 1.1 Overview 1.
PAGE 2
Robustel GoRugged M1000 Quick Guide 1.3 Working Mode Switch Switch There are two working modes available in the modem, please read carefully before operate the Modem Configurator software: Mode Description When DIP switches to Config Mode, user could use follow functions: 1. Configure modem via Modem Configurator; 2. SMS Direct; Config Mode 3. Auto-reboot; 4. Upgrade firmware. Serial port default parameters: 115200, 8, None, 1 When DIP switches to Normal Mode, user could use follow functions: 1.
PAGE 3
Robustel GoRugged M1000 Quick Guide 1.5 Connecting the I/O Device and Sensors Digital Input Dry Contact: Digital Output (Sink Type) 1.6 Grounding the Modem Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground connection from the ground screw to the grounding surface prior to connecting devices. Note: This product is intended to be mounted to a well-grounded mounting surface, such as a metal panel. 1.
PAGE 4
Robustel GoRugged M1000 Quick Guide Chapter 2. Hardware Installation 2.1 Insert/Remove SIM Card SIM card is used for connecting to cellular network, you need buy SIM card from local operators. Note: 1. Don’t forget to screw the cover for again-theft. 2. Don’t touch the metal surface of the SIM card in case information in the card is lost or destroyed. 3. Don’t bend or scratch your SIM card. Keep the card away from electricity and magnetism. 4.
PAGE 5
Robustel GoRugged M1000 Quick Guide Chapter 3. Operate the Modem 3.1 Modem Configurator Overview Modem Configurator is a PC-based configuration software tool for managing and configuring Robustel M1000 series modems. With a full graphics mode and Windows-based environment, even first time users will find it easy to learn how to use this new software tool. Note: Modem Configurator can be used with Windows 2000/XP/Vista/7 32/64-bit operation systems. 3.2 Starting Modem Configurator via Serial interface 2.
PAGE 6
Robustel GoRugged M1000 Quick Guide see the popup windows “Operation Succeed!”. 4. Configuring the modem via M1000 configurator. Note: Please refer to Robustel GoRugged M1000 User Guide to get more details about M1000’ configuration. RT_QG_M1000 _v.1.0.0 24.01.