Specifications

RobustelGoFixedW800UserGuide


RT_W800_UG_v02.00 04.11.2011 Page33/5 9 
Confidential
3.6.8QoSConfiguration
Pleasegotopath:Network‐>QoSConfigurationpagetoenableQueueManagementConfiguration.IfEnableQoS
checkboxisselected,adefaultDSCPmarkshouldbechosentoautomaticallymarkincomingtrafficwithoutref erence
toaparticularclassifier.ClickApply/Savebuttontosave.

Note:IfEnableQoScheckboxisnotselected,allQoSwillbedisabledforallinterfaces;ThedefaultDSCPmarkisused
tomarkallegresspack etsthatdonotmatchanyclassificationrules.

PleaseclickQoSQUEUEbuttontoentertheQoSQueuesetuppage,thenclickAddbu tton.Thisscreenallowsyouto
configureaQoSqueueandassignittoaspecificlayer2interface.Thescheduleralgorithmisdefinedbythelayer2
interface.ClickApply/Savetosaveandactivatethequeue.

Please click QoS Class button to enter QoS Classification Setup page, then click Add button to configure network
trafficclasses.Thisscreencreatesatrafficclassruletoclassifytheupstreamtraffic,assignqueuewhichdefinesthe
precedenceandtheinterfaceandoptionallyoverwritetheIPheaderDSCPbyte.Aruleconsistsofaclassnameand
atleastonecondition.Allofthespecifiedconditionsinthisclassificationrulemustbesatisfiedfortheruletotake
effect.ClickApply/Savetosaveandactivatetherule.
