Specifications

RobustelGoFixedW800UserGuide


RT_W800_UG_v02.00 04.11.2011 Page17/59 
Confidential
Chapter3.  OperatetheGateway
3.1 DefaultConfiguration
The Gateway has pre‐configured with the VCI/VPI which is in common use. The default dial‐up mode is bridge
encapsulation.Forbridgemode,noneedtoconfigureanymorepar ameter.However,thethirdpartydial‐upsoftware
isneededforconnectionwiththeInternet.

3.2 Configuration
ThedefaultIPaddressforGatewayis:192.168.1.1;theSubnetMaskis：255.255.255.0.
UserscanconfiguretheGatewaythroughan Internetbrowser.TheGatewaycanbeusedasgatewayandDNSserver;
usersneedtosetthePC’sTCP /IPprotocolasfollow:

1. SetthePCIPaddressatsamesegmentoftheGatewaysuchassettheIPaddressofthenetworkcardtooneof
the“192.168.1.2”to“192.168.1.254”excluding“192.168.1.1”.
2. SetthePC’sgatewaythesameIPaddressastheGateway’s.
3. SetPC’sDNSserverthesameasGateway’sIPaddressorthatofaneffectiveDNSserver.

3.3 LogIntheGateway
Power on to start the Gatew ay, making sure your PC can PING via LAN port of Gateway (the factory default IP is
192.168.1.1), then run IE. Inputting http://192.168.1.1 in the address column, press ENTER, and authentication
interfacewillpopupasbelow: