4 SECTION / CARBON FIBER VANTAGE SERIES 3 & 5
Extending the Tripod Legs Turn each twist-lock clockwise, and extend each leg to the desired length.Turn the twist-locks counterclockwise to tighten.
85° ° 55 25° Adjusting the Leg Angles Adjust the leg angle by lifting up the leg angle lock. Move the leg to the desired angle, and press down on the lock to secure the leg.
Swapping the Feet The tripod comes with the rubber feet installed. To swap the feet, unscrew the rubber feet, and replace them with the included wide feet or spikes. To tighten or loosen the spikes and wide feet , use the included smaller hex key.
Swapping the Flat Plate and Video Bowl 1. Press the plate lock in so the gears engage, and swing the lock up to loosen the plate. 2. Pull the platform release, and lift the flat plate from the yoke. 3. Insert the video bowl into the yoke, and press it into place 2 until it locks. Before you proceed, tighten the plate lock.
Attaching a Head to the Flat Plate 1. Remove the rubber guard to reveal the 3/8-16 mounting post. 2. Remove the flat plate by following the instructions above. 3. Screw the flat plate onto the bottom of the head. Use the included hex key to tighten the set screw if necessary. 4. Replace the flat plate and head assembly by pressing it into the yoke until it locks. Before you proceed, make sure to tighten the plate lock.
Specifications Maximum Load Maximum Height Minimum Height Folded Length Leg Sections Weight RC-5558 55 lb. (25 kg) RC-5570 55 lb. (25 kg) RC-8860 77 lb. (34.92kg) RC-8880 77 lb. (34.92kg) 58.5 in. (148.6 cm) 3.7 in. (9.3 cm) 22.5 in. (57.1 cm) 4 5.2 lb. (2.3 kg) 70.1 in. (177.8 cm) 4 in. (10.1 cm) 25.4 in. (64.5 cm) 4 5.6 lb. (2.5 kg) 63.8 in. (162 cm) 4 in. (10.2 cm) 24.5 in. (6.2 cm) 4 6.3 lb. (2.85 kg) 80.5 in. (204.4 cm) 4.5 in. (11.4 cm) 28.5 in. (72.3 cm) 4 6.5 lb. (2.
Ten-Year Limited Warranty This Robus product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of ten (10) years from the original purchase date or thirty (30) days after replacement, whichever occurs later.
