Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 94
Where:
• M203 => Back spindle clockwise rotation
• M204 => Back spindle anti-clockwise rotation
• M205 => Back spindle rotation stop
• B => Back spindle axis movement co-ordinate
6.2 “M” AUXILIARY FUNCTIONS
The list below contains all the M functions used with the back-spindle option for many specific
applications. For details on how to use these functions, consult the machine documentation.
M10
➪ Active air blow jaws cleaning (back spindle rotation active with open jaws)
M11
➪ air blow jaws cleaning not active (back spindle rotation not active with open jaws)
M54
➪ lance to eject piece forward (option)
M55
➪ lance to eject part backward (option)
M59
➪ activate collet chucks or jaws washing (option)
M60
➪ deactivate collet chucks or jaws washing (option)
M70
➪ activate synchronising between spindle and back spindle
M71
➪ activate synchronising between spindle and back spindle at a defined angle
M72
➪ deactivate synchronising between spindle and back spindle
M100
➪ temporary setting aside of active S
M203 ➪ back spindle clockwise rotation
M204
➪ back spindle anti-clockwise rotation
M205
➪ back spindle stop
M213
➪ M203 with coolant delivery
M214
➪ M204 with coolant delivery
M219
➪ back spindle orientation angle is identified by S)
M220
➪ back spindle brake engaged
M221
➪ back spindle brake released
M236
➪ axis C disabled on back spindle
M237
➪ axis C enabled on back spindle
M238
➪ tool reset sensor in working position
M239
➪ tool reset sensor in home position
M258
➪ back spindle and sensor 2 orientated in work position
M268
➪ close self-centring chuck/back spindle collet chuck
M269
➪ open self-centring chuck/back spindle collet chuck
M986
➪ back spindle external part holder (shafts)
M987
➪ back spindle internal part holder (flanges)