Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 82
It should also be remembered that parameter 5114 determines:
- with chip undercutting: the distance at which the drill is to stop in relation to the last point reached,
when re-entering the hole after undercutting.
- with chip breakage: by how much the drill is to come backward between one drilling cut and the next
To cancel the drilling cycle it is necessary to program function G80 or any G function in group 01,
therefore G0, G1, G2, or G3.
NOTE: On all Graziano Spa machine models the axial tool resetting (tapping drills, cutters etc.) is made
only along axis Z but it is necessary to enter zero in the X location of the tool table for the tool used (See
Concise Guide for Operator, paragraph 3.2)