Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 46
G84 ➪ fixed front tapping cycle (cannot be used with rotating tools).
G85
➪ fixed cycle of frontal boring.
G87
➪ fixed side drilling cycle.
G89
➪ fixed side of lateral boring.
G90
➪ programming with absolute co-ordinates.
G91
➪ programming with incremental co-ordinates.
G92
➪ spindle speed limitation.
G94
➪ feed programming in mm/min.
G95
➪ feed programming in mm/rev..
G96
➪ constant cutting speed programming in m/min.
G97
➪ fixed revolution spindle rotation programming in rpm.
G107
➪ cylindrical interpolation.
G112
➪ polar co-ordinates interpolation
G113
➪ delete polar co-ordinates interpolation.
G174
➪ radial grooves rough machining/pre-finishing cycle.
G175
➪ radial grooves finishing cycle.
G176
➪ axial grooves rough machining/pre-finishing cycle.
G177
➪ axial grooves finishing cycle