Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 4
PAGE PAR. CONTENTS
118 7.8 O9103 Front tapping sub-program
121 7.9 O9104 Radial tapping sub-program
124 7.10 G112 Programming in imaginary co-ordinates
127 7.11 G2/G3 Circular interpolation in G112
129 7.12 G41 G42 G40 Milling radius offset in G112
131 7.13 G107 Cylindrical interpolation
135 7.14 Programming with real Y axis
138 8.0 BAR MACHINING
138 8.1 Example of machine tool loader use with back spindle
140 8.2 Example of machine tool loader use without back spindle
142 8.3 Ex. of machine tool push-bar conveyor use with back spindle
143 8.4 Ex. of machine tool push-bar conveyor use without back spindle
144 8.5 Example of pull-bar conveyor use
OPERATOR READY REFERENCE GENERAL INDEX
146 12.0 MACHINE START UP
146 12.1 Power-on
146 12.2 Execution of axes reference
146 12.3 Write protection key
147 13.0 PROGRAMME MANAGEMENT
147 13.1 How to create a new programme
147 13.2 How to modify an existing programme
147 13.3 How to insert a code (or a block) in a programme
147 13.4 How to modify or replace a code
148 13.5 How to delete a code
148 13.6 How to delete a block
148 13.7 How to copy /paste part of a programme
148 13.8 How to copy a programme
149 13.9 How to delete a programme
149 13.10 How to rename a programme
149 13.11 Selection of a programme for machining