Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 2
0.1 GENERAL INDEX- CONCISE GUIDE FOR PROGRAMMER
PAGE PAR. CONTENTS
7 1.0 FOREWORD
8 2.0 NC MAIN FUNCTIONS AND ADDRESSES
8 2.1 O Program and sub-program number
8 2.2 N Block number
9 2.3 G Preparatory operations
9 2.4 X/Z/B/Y Movement absolute co-ordinates
10 2.5 U/W Movement incremental co-ordinates
12 2.6 F Work feed
12 2.7 S Spindle rotation speed
13 2.8 T Tool selection
15 2.9 M Auxiliary functions
18 2.10 M Other auxiliary functions
19 2.11 / Skipping a block
19 2.12 ( ) Notes and comments
20 3.0 ISO PROGRAMMING
20 3.1 G0 Linear axes rapid traverses
21 3.2 G1 Work linear interpolation
24 3.3 G1 A.. Programming with angles
28 3.4 G2/G3 Circular interpolations
30 3.5 G4 Axis pause time
31 3.6 G95 Feed in mm/rev
31 3.7 G94 Feed in mm/min
32 3.8 G97 Fixed revolutions spindle rotation
33 3.9 G96 Constant cutting speed
34 3.10 G92 Spindle revolution limitations
35 3.11 G33 Thread cutting movements
37 3.12 G41/G42/G40 Tool radius compensation
41 3.13 G54/G59 Workpiece origins
43 3.14 G52 Origin transfer by program