Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 176
20.4 HOW TO COPY A PROGRAMME ON MEMORY CARD
To transfer a programme from the CNC memory to the RS 232C serial port, proceed as follows:
1 - Connect the memory card to that of Pc
2 - Press the key EDITING MODE on the operator’s panel
3 - Press PROGRAM PAGE
4 - Write the code 0 followed by desired program number (ex. 08000)
5 - Press the soft key +
6 - Press soft key WRITE
7 - Press the soft key EXEC
20..5 HOW TO COPY A PROGRAMME FROM THE SERIAL PORT
The following procedure is used to transfer a programme from the PC to the CNC memory.
1 - Connect the machine serial port to the memory of CN to that of PC
2 - Press the key EDITING MODE on the operator’s panel
3 - Press PROGRAM PAGE
4 - Write O code followed by desired program number (ex. 08000)
5 - Press the soft key +
6 - Press soft key READ
7 - Press the soft key EXEC
20.6 HOW TO COPY A PROGRAMME ON THE MEMORY CARD
If you want to use the Memory Card to transfer and receive programmes, you first need to configure
machine parameter n. 20 a 4 ( to modify a parameter see chap. 5)
1 - Insert MEMORY CARD in the opening on left side of monitor
2 - Press the key EDITING MODE on the operator’s panel
3 - Press PAGE PROGRAM
4 - Write code O followed by desired program number (ex. 08000)
5 - Press the soft key +
6 - Press the soft key WRITE
7– Press soft key EXEC