Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 174
20.3 TRANSFER PROGRAMS
Here are some transfer programs tested on Graziano SPA machines with CN Fanuc.
Suggested devices have been tested with a Graziano machine with PC Windows 95 have been tested
many types of software of communication, with cable long 10 meters.
Bigger distances are often possible but they are connected to the cable quality, connectors quality,and
serial port of PC used.
CONNECTION WITH HYPER WINDOWS TERMINAL
This software is an option included in windows operative systhem, insert the following configurations:
SERIAL PORT PC
Propriety: COM 1
Bit at second : 9600
Data bit: 8
Parity: none
Stop bit: 2
Flux control : none
PROGRAM SETTINGS
Terminal buttons
Emulation: Auto detect
Number of buffer lines of backward sliding: 10
SETTING ASCII
TRANSMISSION
Add feed (LF) at every return to start (CR) sent.
RECEPTION
Add feed (LF) at every return to start (CR) sent.
Return automatically.
Proceeding:
To receive a file select the voice “TRANSFER” and “CAPTURE TEXT” (CN-PC), edit the path and the
name with which you want to save the program, and START.
To transfer a file select the voice “TRANSFER” and “SEND FILE OF TEXT” (PC-CN), write the path and
the name of program to transfer and select OPEN. The beginning of transmission is underlined by
character , the end is put in evidence by character !!.
NOTE. If during the load of a program in the CN, the key doesn’t find in the right position (open memory),
is visualised the alarm “071 Not find data” and the program is not loaded in memory.
To end the communication select “FILE”, “EXIT”, now a window appears with question”connection now,
you want to exit?” answer “Yes”.
For amodification or reading of the program open with editor Winword; at the end, save always the mode “
only text”.