Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 17
M52 ➪ tailstock release from bench and hooking onto carriage
M53
➪ tailstock release from carriage and hooking onto bench
M58
➪ spindle and reset sensor orientation in work position
M62
➪ workpiece counter increment on display (only active in automatic mode)
M63
➪ external robot call to change workpiece (optional)
M64
➪ workpiece released indication to external robot (optional)
M65
➪ workpiece locked indication to external robot (optional)
M67
➪ command / wait for bar change to loader (optional)
M68
➪ self-centring chuck /collet chuck closure
M69
➪ self-centring chuck /collet chuck opening
M74
➪ second steady rest arms opening (optional)
M75
➪ second steady rest arms closing (optional)
M78
➪ bar measurement check (option) for Irco loader
M79
➪ bar at end of stroke check (option) for Irco loader
M84
➪ steady rest arms opening
M85
➪ steady rest arms closing
M86
➪ retractable steady rest in working position (up)
M87
➪ retractable steady rest in home position (down)
M88
➪ workpiece unloading arm in home position (down)
M89
➪ workpiece unloading arm in working position (up)
M90
➪ probe parameters memorisation at PMC ( from #812 to #822)
M100
➪ temporary suspension of active S