Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 169
FUNCTION KEYS
There are seven function keys referred to as pages:
POSITION PAGE: This page is used to display absolute, relative and machining dimensions
of the current machining process and of the manual shift.
PROGRAMME PAGE :
This page is used to manage programmes in EDIT MODE (i.e. you
can write, modify or delete programmes) and to write the codes for the MDI MODE
execution.
SETTING / OFFSET PAGE:
This page is used to display and modify tool offset, origins and
machine parameters that can be accessed by operators.
PARAMETERS PAGE :
This page is used to display and modify all machine
parameters.
MESSAGES AND ALARMS PAGE :
This page is used to display the codes and the
texts of all the alarms
GRAPHIC PAGE: This page is used to perform graphic simulation of the active
programme (Par 2.12)
MACRO EXECUTER PAGE:
Manufacturers can use this page to create customised
macros for specific options (for ex: movement of the GT300 tailstock)
ARROW KEYS The movement of the cursor is controlled by four keys:
UP
DOWN
RIGHT
LEFT
PAGE KEYS To skip from one page to another, the following keys can be used :
PAGE UP replaces the current page with the following one
PAGE DOWN replaces the current page with the preceding one.