Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 160
Press any page (EDITING, POSITION, SETTING etc.) to exit the TAILSTOCK SETTING macro
NOTE
: For further details on how to adjust the thrust pressure and the feed speed of the tailstock, see
USER’S AND MAINTENANCE MANUAL included in the machine documents.
17.3 TAILSTOCK REPOSITIONING
If the E78 (look for the tailstock zero) alarm appears on the screen, follow the repositioning procedure in
relation to the tailstock reference point:
1 - Press the key JOG on the operator’s panel
2 - Press the key MACRO EXECUTER
3 - Press the soft key F1 TAILSTOCK CAMS SETTING
4 - Disable, if active, the tailstock thrust by means of the selector switch 0 / 1
ON / OFF THRUST
5 - Press the soft key FND ZERO
Press any page (EDITING, POSITION, SETTING etc.) to exit the TAILSTOCK SETTING macro