Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 154
(If a Manual Probe has been chosen extract the probe arm manually)
When the probe is enabled, the CNC displays the correctors’ table automatically
5 – By means of the keys JOG Z- Z+ X- X+ and checking with the axes potentiometer, position the
tool near the measuring probe
6 – Reduce the potentiometer to 1 or 2 %
7 – Lean on the desired probe X+ X- Z+ Z-
Once contact has been achieved, the axis will stop automatically
8 – Move away from the probe then repeat this operation on the other axis to be reset
Repeat from item 2 to item 10 to measure another tool
All the tools have been correctly reset on the X-axis, whereas for the X-axis, they refer to the machine
“ZERO ”. To refer dimensions of the Z-axis to the “piece zero point” the origin measuring procedure has to
be performed (par. 4.1) with one of the tools reset on the probe.
14.6 RESET TOOLS FOR MACHINES TWIN
The proceeding to reset tools for machines Twins is equal to that of CTX. Start with this proceeding only
after having brought the spindle 2 in the position in which, machining in MDI will be executed, for example
“GO BO” (if quote of machining is zero)
Remember to select the work channel CN1 for spindle 1 and CN2 for spindle 2.
1 Mount the piece on chuck
2 Press MDI on operator’s panel
3 Press PROGRAM PAGE
4 Select work channel with CN1/CN2
5 Activate the original of program editing for example G54 and press EOB INSERT START
6 Activate the first external tool to reset followed by the corrector ex. T101 and EOB INSERT START
7 Put the spindle in rotation. Ex. G97 S500 M4 and press EOB INSERT START
8 Turn the piece with JOG Z- Z+ X- X+ checking with potentiometer or hand-wheel
9 After turning the piece move only with Z axis staying on X turning co-ordinate
10 Stop the spindle pressing M5 and press EOB INSERT START
11 Measure the turned diameter
12 Press SETTING PAGE until COMPENS.
13 Press soft key COMPEN
14 Press soft key GEOM
15 Position with the cursor on the corrector to reset
16 Edit X followed by the measured value ex. X100.3
17 Press soft key MEASURE
18 Put the spindle in rotation. Ex. G97 S500 M4 and press EOB INSERT START
19 Face off the piece using JOG Z- Z+ X- X+ checking with the potentiometer