Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 149
7 - Press the soft key COPY.
8 - Press the soft key ALL.
9 - Type in the new programme number (without the character O)
10 – Press the key INPUT
11 - Press the soft key EXEC .
13.9 HOW TO DELETE A PROGRAMME
To delete a programme, follow this procedure:
1 - Select EDIT MODE on the operator’s panel
2 - Press PROGRAMME PAGE
3 - Type in the address O followed by the number of the programme to be deleted
4 - Press the key DELETE
The following message will appear on the screen: DELETE O…. (number of the programme to be
deleted)
5 – Press the soft key EXEC to confirm deletion of the programme
N.B. Once this procedure has been carried out, the programme following -in the list - the one that has
been deleted will be automatically selected and will, therefore, be active.
13.10 HOW TO RENAME PROGRAMME
To rename a programme, follow this procedure:
1 - Select EDIT MODE on the operator’s panel
2 - Press PROGRAMME PAGE
3 - Look for the programme that is to be renamed (For Ex. O800 and soft key RECE O)
4 - Position the cursor on the programme number (within the programme)
5 - Type in the new programme number
6 - Press the key MODIFY
13.11 SELECTIION OF A PROGRAMME FOR MACHINING
A programme that has been recalled to be modified or to be written is automatically active and can be
used for machining purposes. The one used to modify a programme.
1 - Select EDIT MODE on the operator’s panel
2 - Press PROGRAMME PAGE
3 - Type in the code O followed by the desired number (for ex. O8000)
4 - Press the soft key RECE O
By pressing AUTOMATIC MODE on the operator’s panel, the selected programme will be ready to
perform machining.