Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 148
13.5 HOW TO DELETE A CODE
To delete a code in a programme, follow this procedure:
1 - By means of the arrow keys, position the cursor on the code to be deleted.
2 - Press the key DELETE
13.6 HOW TO DELETE A BLOCK
To delete a block in a programme, follow this procedure:
1 - By means of the arrow keys, position the cursor on the block to be deleted.
2 - Press the key EOB
3 - Press the key DELETE
13.7 HOW TO COPY/PASTE PART OF A PROGRAMME
To copy/paste a number of blocks within a programme, or from one programme to another follow this
procedure:
1 - Position the cursor on the first block to be copied
2 - Press the soft key (OPER)
3 - Press the soft key +
4 - Press the soft key EDI - EX .
5 - Press the soft key COPY.
6 - Press the soft key CURS §
7 - Position the cursor on the last block to be copied
8 - Press the soft key § CURS
9 - Press the soft key EXEC .
The part of the programme that has been copied will be temporarily stored in the programme O0000.
10 - Position the cursor on the block following the one where the copied section is to be inserted
11 - Press the soft key JOIN.
12 - Press the soft key § CURSOR
13 - Press the soft key EXEC
13.8 HOW TO COPY A PROGRAMME
To generate two identical programmes with different names, follow this procedure:
1 - Select EDIT MODE on the operator’s panel
2 - Press PROGRAMME PAGE
3 - Look for the programme that is to be copied (For Ex. O800 and the soft key RECE O)
4 - Press the soft key (OPER)
5 - Press the soft key +
6 - Press the soft key EDI - EX .