Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 132
G107 C0 Cancels the cylindrical interpolation G107
The working plane is transformed in this way:
- Functions G107C… and G107 C0 must be written in a block on their own
- After instruction G107C… only functions G1 G2 G3 can be used, direct programming functions ,A ,C etc
.cannot be used
- Tool radius offset G41,G42 and G40 must be activated and deactivated inside function G107
- All work in G107 mode is to be carried out with radial motor driven tools.
- For correct machining the cutters/bits are to be aligned and centred as to the motor driven tool.
- Within the G107 interpolation no fixed drilling or tapping cycles can be used.
- Within G107 interpolation no displacement of origin G52 and G54 –G59 is allowed