Specifications

_____________________________________________________________________
_____________________________________________________________________
CONCISE GUIDE FANUC 108
7.2 MOTOR DRIVEN TOOLS RESET
All the tools mounted on motor driven modules (cutters, bits, tapping bits etc.) reset with the same
procedure used for normal turning tools.
Axial motor driven modules
=> They reset only along axis Z, the tool length along axis X must be zero
(X0) because these tools are co-axial with the turret “zero” position. The reset procedure is described in
the Concise Guide for Operator, chapter 14 – TOOL RESET.
Radial motor driven modules
=> These reset on both axes (X and Z) like a standard lathe tool. When
resetting on axis Z it must be decided whether to reset the tool in relation to the milling machine rotation
axis or on the side of the actual milling machine. The reset procedure is described in the Concise Guide
for Operator, chapter 14 – TOOL RESET