Technical data

Installation, user and maintenance manual – Series B15 Generators

• pre-mix burner in stainless steel.

• high head blower.

• cylindrical combustion chamber in stainless steel.

• heat exchangers in corrugated stainless steel with a very large exchange

surface.

• external panelling in steel with epoxy powder enamel ﬁnish.

• high capacity axial fan.

• CONTROL AND SAFETY COMPONENTS:

• controller board, with CPU: controls burner ignition, ﬂame detection; blow-

er speed control, fan speed control.

Power voltage: 230 V - 50 Hz.•

Safety time: 5 seconds.•

Pre-plunge time: 5 seconds.•

Model: Bertelli & Partners DIMS05 with ignition transformer.•

• limit thermostat set to 100°C, automatic reset, to prevent heat exchanger

overheating.

• Gas solenoid valve: if a safety device trips (limit thermostat) the gas valve

is de-excited, thus cutting oﬀ gas supply to the burner.

Power voltage: 230 V - 50 Hz.•

Operating temperature: 0° C to +60° C.•

Model: SIT 830 Tandem / BM 762.•

Figure 2.1

Electrical panel.

LEGEND

A transformer 230/24 V AC

B ignition transformer

C terminal block with fuse

D limit thermostat

E controller