Technical data

15 Installation, use and Maintenance manual - ed. 04/14
o Alarm
 Highlights the system has an error
 The number of pulses indicates the fault present.
The purpose of the system is to control the following components
V1 Water inlet valve – controls the water into the cooler
V2 Drain valve – controls the drain from the cooler
L1 Level Probe – controls the water levels in the cooler
L2 Level Probe – controls the water levels in the cooler
L3 Level Probe – controls the water levels in the cooler
L4 Level Probe – controls the water levels in the cooler
P1 Circulation Pump – circulates the water onto the cooling media
F1 Fan – double wound single phase fan motor
Water in
L1 L2 L3 L4
P1
V1
F1
V2
Water out